Rockwell Automation 57C421B Pulsetach Input Module/DCS 5000/AutoMax - Manual (Page 35)

4Ć13
Bit: 11
Description: Borrow Status Reset
Bit 11 has a default value of one. Writing a zero to this bit will reset
the Borrow Status bit (register 7, bit 1), but subsequent reads will
return a value of one.
Bit: 12
Description: Counter Equals Comparator Status Reset
Bit 12 has a default value of one. Writing a zero to this bit will reset
the Counter Equals Comparator Status bit (register 7, bit 4) and the
comparator equal interrupt (see register 5, bit 11), but subsequent
reads will return a value of one.
Bit: 13
Description: External Latch Status Reset
Bit 13 has a default value of one. Writing a zero to this bit will reset
the External Latch Status bit (register 7, bit 5) and the external latch
interrupt (see register 5, bit 8), but subsequent reads will return a
valueof one.
Bit: 14
Description: External Count Stop Status Reset
Bit 14 has a default value of one. Writing a zero to this bit will reset
the External Count Stop Status bit (register 7, bit 6) and the external
count stop interrupt (see register 5, bit 9), but subsequent reads will
return a value of one. Note that the Inhibit Counter bit (register 6, bit
9) also must be reset after an external count stop interrupt is
generated.
Bit: 15
Description: External Origin/Clear Status Reset
Bit 15 has a default value of one. Writing a zero to this bit will reset
the External Origin/Clear Status bit (register 7, bit 7) and the Z pulse
and origin interrupt (see register 5, bit 10), but subsequent reads will
return a value of one.