Rockwell Automation 6182 Industrial Computer Installation Instructions - Manual (Page 12)

12 RAC6182 Industrial Computer
Publication 6182-IN001D-MU-P
Power Connections
A three-contact removable terminal block is used to connect power to the
RAC6182 Computer. The RAC6182 Computer AC version accepts 120/240V
AC. The power supply is autoranging. The DC version accepts 18-32V DC. The
removable terminal blocks are different on the AC and DC versions and cannot be
interchanged.
ATTENTION: The power supply must be connected to an
earth ground. Failure to follow this warning could result in
severe electrical shock.
ATTENTION: Some 1784 communication cards have a
connector like the one used for the RAC6182 power connector.
Do not plug power into these connectors.