Hazardous location considerations – Rockwell Automation 6182 Industrial Computer Installation Instructions User Manual
Page 4
Advertising
4
RAC6182 Industrial Computer
Publication 6182-IN001D-MU-P
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or
non-hazardous locations only. The following WARNING statement applies to use
in hazardous locations.
ATTENTION: EXPLOSION HAZARD.
• Substitution of components may impair suitability for Class
I, Division 2.
• Do not replace components or disconnect equipment unless
power has been switched off or the area is known to be non-
hazardous.
• Do not connect or disconnect components unless power has
been switched off or the area is known to be non-hazardous.
• All wiring must comply with N.E.C. article 501-4(b).
Advertising