Rockwell Automation 6182 Industrial Computer Installation Instructions - Manual (Page 2)

Installation Instructions
RAC6182 Industrial Computer
Chapter Objective
This chapter describes installation of the RAC6182 Industrial Computer for the
Windows CE Operating System including how to install the RAC6182 in a panel
using mounting clips.
European Union Compliance
The RAC6182 Industrial Computer meets the European Union Directive
requirements when installed within the European Union or EEA regions and has
the CE mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation / Allen-Bradley Internet site: www.ab.com
ATTENTION: The RAC6182 Industrial Computer is intended
to operate in an industrial or control room environment, which
utilizes some form of power isolation from the public low
voltage mains. Some configurations may not comply with the
EN 61000-3-2 Harmonic Emissions standard as specified by the
EMC Directive of the European Union. Obtain permission
from the local power authority before connecting any
configuration that draws more than 75 watts of AC power
directly from the public mains.