Rockwell Automation 6182 Industrial Computer Installation Instructions - Manual (Page 14)

14 RAC6182 Industrial Computer
Publication 6182-IN001D-MU-P
Relay Output
The RAC6182 Computer has a relay output. This output is a normally-open hard
contact relay rated for 24VDC, 500mA. A two-contact removable terminal block
is used to connect to the relay output.
The terminal block is equipped with two retainer screws to prevent accidental
disconnection. Tighten these screws to a torque of 5 inch–pounds (0.56 N•m).
The following replacement relay output terminal blocks can be ordered from
Rockwell Automation:
Part Number Description
6189-2CONN Relay output terminal block (qty 1)
120/240VAC Unit terminal block (qty 1)
24VDC Unit terminal block (qty 1)