Rockwell Automation 6182 Industrial Computer Installation Instructions - Manual (Page 15)

RAC6182 Industrial Computer 15
Publication 6182-IN001D-MU-P
Network Connections
The RAC6182 Computer accommodates CAT5 twisted pair Ethernet cabling with
RJ45 connectors to support 100 Mbps network data transfer. Shielded cabling is
required to meet CE compliance.
A ferrite collar is included with the RAC6182 and is intended for use with an
Ethernet cable connected to a RAC6182. Install the collar for suppression of
electromagnetic emissions and interference. The collar is required for compliance
with the European EMC directive.
To be effective, the ferrite collar must be placed on the cable where the cable exits
the RAC6182.
To install the ferrite collar:
1. Fold the collar so that it encircles the cable.
2. Press the plastic housing until the collar snaps together.
3. Check that the collar is fully latched.
Ferrite Collar
Folded Around Cable
Open Ferrite Collar
(Side View)