Rockwell Automation 6182 Industrial Computer Installation Instructions - Manual (Page 13)

RAC6182 Industrial Computer 13
Publication 6182-IN001D-MU-P
The terminal block is equipped with two retainer screws to prevent accidental
interruption of power to the RAC6182 Computer. Tighten the screws on the AC
version to a torque of 5 inch–pounds (0.56 N•m). Tighten the screws on the DC
version to a torque of 2.5 inch–pounds (0.28 N•m).
WARNING: EXPLOSION HAZARD! Do not connect or
disconnect equipment unless power has been switched off or
the area is known to be non-hazardous.
The following terminal blocks can be ordered from Rockwell Automation:
Part Number Description
6189-2CONN 120/240VAC Unit terminal block (qty 1)
24VDC Unit terminal block (qty 1)
Relay output terminal block (qty 1)