Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 117)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 117
Accessories Installation Appendix B
4. Remove the PCIe x8 riser board assembly from the chassis (B).
5. Remove the screws that secure the default riser board (C).
6. Remove the riser board from its bracket (D).
7. Place the default riser board with its screw on a static-dissipating work
surface or inside an antistatic bag.
8. Hold the new riser board by its edge and remove it from its protective
packaging.
9. Align the new riser board with the PCI/PCIe riser board bracket (E).
Single-slot
Riser Board Two-slot
Riser Board
Integrated Display
Models Shown
A
A
A
B
A
A
A
B
Single-slot
Riser Board
Two-slot
Riser Board
C
C
D
C
C
D