Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 98)

98 Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 7 Use a Touchscreen
Resistive Technology Resistive touchscreens are activated when you apply pressure to the touchscreen
with your finger. You can operate a resistive touchscreen while wearing gloves.
Resistive touchscreens accept only single finger input. Multi-finger input or ‘palm
contact’ can cause an incorrect touch input.
Calibrate the Resistive
Touchscreen The resistive touchscreen supplied with the computer is factory installed and
calibrated.
Perform the following steps to recalibrate the touchscreen.
1. From the Windows control panel menu, select Tablet PC Settings.
2. On the Display tab of Tablet PC Settings, click Calibrate.
3. Follow the calibration instructions on the touchscreen.
ATTENTION: Do not use sharp instruments to activate the touchscreen.
Scratching the surface of the touchscreen can damage the display.
IMPORTANT Resistive touchscreens are only on Tier 2 computer models. See Computer
Options on page 11 to see if your model is Tier 2.