Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 67)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 67
UEFI Set-up Utility Chapter 5
SATA Configuration (RAID mode)
Parameter
(1)
(1) See page 60 for an explanation of common buttons near the bottom of screen.
Description
SATA Mode Selection Select an operation mode for the onboard SATA controller.
In this case, RAID mode is selected.
(2)
(2) Applies only to computers that ship with the Windows Server 2008 R2 operating system.
SATA Port (0, 1) Indicates the drive make, model, and size.
Port (0, 1) Enables or disables the SATA port.
Options: Enabled (default) or Disabled
SATA Device Type Indicates the SATA drive type connected to the SATA connector.
Options: Hard disk drive (default) or solid-state drive