Watchdog timer – Rockwell Automation 6189x Integrated Display Industrial Computers User Manual User Manual

Page 77

Advertising
background image

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014

77

UEFI Set-up Utility

Chapter 5

Watchdog Timer

Crtl

Enables or disables key combination with CTRL key.
Options: Disabled (default), Left-CTRL, or Right-CTRL

Shift

Enables or disables key combination with Shift key.
Options: Disabled (default), Left-Shift, or Right-Shift

Alt

Enables or disables key combination with ALT key.
Options: Disabled, Left-ALT (default), or Right-ALT

(1) See

page 60

for an explanation of common buttons near the bottom of screen.

Parameter

(1)

(1) See

page 60

for an explanation of common buttons near the bottom of screen.

Description

BIOS Boot time WatchDog

Enables or disables BIOS boot timeout.
Options: Enabled or Disabled (default)

BIOS Timer Out value

(2)

(2) This field is only visible when BIOS Boot time Watchdog is enabled.

Set BIOS timer timeout value (10, 20, or 30 minutes). 10 is default.

OS time WatchDog

Enables or disables OS timeout.
Options: Enabled or Disabled (default)

Timer Out (1-60 Min)

(3)

(3) This field is only visible when OS time Watchdog is enabled.

Set WatchDog timer timeout value (1…60 minutes) in 1 minute increments.
60 is default.

IMPORTANT

If you enable the BIOS Boot time Watchdog, then it must be disabled before
you update the BIOS firmware.

Parameter

(1)

Description

Advertising
This manual is related to the following products: