Mount the non-display computer – Rockwell Automation 6189x Integrated Display Industrial Computers User Manual User Manual
Page 32
32
Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 2
Installation
Mount the Non-display Computer
Follow these steps to mount a non-display computer.
1. Verify that the power is disconnected.
2. Depending on your application, drill holes to accommodate M5-sized
screws.
for mounting hole locations and dimensions.
3. Mount the computer by using four M5 pan head screws.
Tighten to a torque that is appropriate for the screw and material.
Figure 16 - Acceptable and Unacceptable Mounting Positions for Non-display Computers
IMPORTANT
Certain restrictions apply when mounting the computer to a wall or with a
bookshelf mounting bracket. See
for details.
The bookshelf mounting bracket, catalog number 6189V-BOOKBRKT, must be
ordered separately.
For horizontal mounting, see
for mounting clearance requirements.
Acceptable
Unacceptable
For Horizontal Mounting
Under Table Mount
(top view of computer)
Machine or Table Mount
(top view of computer)
For Vertical Mounting
Bookshelf Mounting