Rockwell Automation 9220-CC QUICK START CONTROLNET NTWK User Manual
Controlnet network compliance tool, Quick start, Catalog number 9220-cc)
Quick Start
Publication 9220-10.3 — September 1997
ControlNet Network
Compliance Tool
(Catalog Number 9220-CC)
About this Document
Use this document to install and use the ControlNet
network
compliance tool. This tool verifies a product’s compliance to the
ControlNet network protocol.
This tool was designed for engineers and developers familiar with the
ControlNet network and network troubleshooting. To use the tool
efficiently, you should be familiar with ControlNet protocols.
For additional information on these protocols, see the ControlNet
Network Specification.
We use these conventions in this document:
Convention
Shows
9 pt Courier
Screen displays and prompts
9 pt Courier bold
Text you type as shown at the DOS prompt
9 pt Courier italic
Text you type specific to your setup at the DOS prompt
Enter
Keys that you press
For this information
See page
understanding the tool
2
system requirements
4
installing the compliance tool
5
using the compliance tool
7
troubleshooting
14