Rockwell Automation 9220-CC QUICK START CONTROLNET NTWK - Manual (Page 5)

ControlNet Network Compliance Tool 5
Publication 9220-10.3 — September 1997
Installing the Compliance Tool
1. Insert the 9220-CC disk #1 into your computer’s 3.5” diskette drive.
2. Create a directory on your hard drive for the tool.
mkdir tool_directory Enter
3. Copy the contents of the tool disk to the directory you created.
copy A:*.* c:\ tool_directory Enter
4. Execute file 9220cc.exe.
9220cc.exe Enter
5. Execute the self-extracting data file associated with the device being
tested. For example (for PLC  testing):
plc5data.exe Enter
6. Edit your config.sys file to set up the path for the qtp.dat and ktct.cfg
files.
A. Open your config.sys file.
edit config.sys Enter
B. Add these statements to the file.
set testpath=C:\ tool_directory