Rockwell Automation 9220-CC QUICK START CONTROLNET NTWK - Manual (Page 11)

ControlNet Network Compliance Tool 11
Publication 9220-10.3 — September 1997
Running a Test in Individual Test Mode
1. Change to the tool_directory.
cd tool_directory Enter
All test results are appended to the qtp.log file. If a qtp.log file
already exists, we recommend that you either delete or save the
qtp.log file before running the individual test mode.
2. Run the test.
c:\tool_directory>dev_tst.exe 75 1 8 Enter
MAC ID of the MAC ID of the test platform MAC ID of the DUT
Test number
You see a display similar to this screen.
"