Rockwell Automation 9220-CC QUICK START CONTROLNET NTWK - Manual (Page 6)

ControlNet Network Compliance Tool 6
Publication 9220-10.3 — September 1997
C. Save this change to the file.
Alt
+
F
+
S
D. Close the file.
Alt
+
F
+
X
E. Activate this change by rebooting your computer.
Ctrl
+
Alt
+
Del
The default dual port address of KTCT is 0xd0000, and the I/O
address is 0x220. If your addresses are different, modify the
KTCT data in the ktct.cfg file to reflect the changes.
7. Update the 9220-KTCT main code using the KTCT binaries on
disk #2.
For more information, refer to the ControlNet Flash Tool manual for
the ControlNet Communication Card Installation Instructions,
publication 9220-5.3.
Follow the directions given in the ControlNet Communication
Card Installation Instructions, publication 9220-5.3, for the
1784-KTCX update procedure.
"
"