Rockwell Automation 9220-CC QUICK START CONTROLNET NTWK - Manual (Page 8)

ControlNet Network Compliance Tool 8
Publication 9220-10.3 — September 1997
Running a Test in Script Mode
In the script mode, you can use the test sequencer to run alltests, ccm_cs
or any object test script files.
1. Change to the tool_directory.
cd tool_directory Enter
All test results are appended to the qtp.log file. If a qtp.log file
already exists, we recommend that you either delete or save the
qtp.log file before running the script mode test.
2. Run the test.
c:\tool_directory>ts alltests 4, 8
Enter
MAC ID of the DUT MAC ID of the test platform
"