Rockwell Automation 5370-CMPK Color CVIM Module MATH-PAK - Manual (Page 15)

Chapter 3
Installation
3–2
Figure 3.1 Inserting the MATH-PAK installation card
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
MATH-PAK
installation
card
Color CVIM
module
Archive
Memory slot
Card Label Metal Strip
The loading process requires about 45 seconds. The LEDs near the top of
the face of the Color CVIM module indicate the progress of the
three–phase loading process (with each phase taking about 15 seconds):
LEDs
MATH-PAK Loading Phase
LEDs
1 2 3
Pass/Fail
Red–to–yellow–
to–green
Green
Red–to–yellow–
to–green
Trigger 1 Green Green Off
Trigger 2 Off Green Green
When the loading process is complete, the Color CVIM module initiates
its normal powerup sequence.
•
Once the powerup sequence is complete, you can verify that the
MATH-PAK option is installed by checking for the MATH-PAK
indication on the powerup title banner on the monitor; if the MATH-PAK
option is installed, it is listed as on of the “Packages” on the title banner,
along with other installed options, if any.
•
Remove the MATH-PAK installation card from the Archive Memory slot.
At this point, the MATH-PAK option has been successfully installed, and can
be used as required in your Color CVIM module configurations.