Rockwell Automation 5370-CMPK Color CVIM Module MATH-PAK - Manual (Page 72)

Appendix A
Color CVIM Communications with MATH-PAK Installed
A–2
The Color CVIM communications manual lists and describes all of the
accessible results blocks. The results information for an enabled formula
will replace the results information for a corresponding gage or window in
the results blocks, as shown in the following tables:
•
Table 4.C, page 4–14, shows the locations of the formula results in results
block 1.
•
Table 4.D, page 4–18, shows the locations of the formula results in results
block 2.
•
Table 4.B, page 4–10, shows the locations of the formula results in results
block 3.
Configurable results block: Results block 6 is a configurable results block
(refer to the Color CVIM communications manual for more information). If
need be, you can configure results block 6 to supply tool results information
that has been replaced by formula information in results blocks 1–3. You
cannot configure the results block 6 to provide formula results information.
When attempting to use results block 6 to obtain gage or window statistics
information, the gage or window statistics will be replaced by formula
statistics, if the corresponding formula is enabled (refer to Table A.1, page
A–1, for a listing of the formula numbers and the corresponding tools).
Data types for formula results:
•
If the results are for a formula which includes any items that require fixed
point values, then the result will be conveyed in fixed point values
(16.16).
•
If the results are for a formula which has only items that require integer
values, then the result will be conveyed in integer values (32.0).
Results Blocks