Rockwell Automation 5370-CMPK Color CVIM Module MATH-PAK - Manual (Page 76)

Appendix A
Color CVIM Communications with MATH-PAK Installed
A–6
Table A.4
Results Block 3 – Formula/Tool Results
Word #
PI
Backplane
RS–232
and
Remote
I/O
Bit #
Enabled Formula
(Formula Not Enabled)
Usage Notes
162–163 2–3 0–15
Formula #47 Result
(Gage #23 Value)
164–165 4–5 0–15
Formula #48 Result
(Gage #24 Value)
166–167 6–7 0–15
Formula #49 Result
(Gage #25 Value)
168–169 8–9 0–15
Formula #50 Result
(Gage #26 Value)
170–171 10–11 0–15
Formula #51 Result
(Gage #27 Value)
172–173 12–13 0–15
Formula #52 Result
(Gage #28 Value)
174–175 14–15 0–15
Formula #53 Result
(Gage #29 Value)
176–177 16–17 0–15
Formula #54 Result
(Gage #30 Value)
178–179 18–19 0–15
Formula #55 Result
(Gage #31 Value)
180–181 20–21 0–15
Formula #56 Result
(Gage #32 Value)
The Color CVIM communications manual lists and describes all of the
accessible configuration blocks. The configuration information for an
enabled formula (fault and warning range information only) will replace the
configuration information for a corresponding gage or window in the
configuration blocks, as shown in the following tables:
•
Table A.5, page A–7, shows a summary cross-listing of the configuration
block numbers for corresponding formulas and tools.
•
Table A.6, page A–8, shows the configuration block information (blocks
46–77) for formulas 9–16, 25–32, 41–56 (gages 1–32).
•
Table A.7, page A–9, shows the configuration block information (even
numbered blocks, 110–156) – for formulas 1–8, 17–24, 33–40 (windows
1–24).
Configuration Blocks