Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 132)

4-50 LiquiFlo AC Drive, Software Reference Version 6.4
P.066 to P.069 Network Output Register 1 Source through
Network Output Register 4 Source
These parameters
select the signal
written to the option
port network output
registers 1 through 4.
See figure 4.9.
Parameter Range: 0 = (P.066) Motor Kw display value
(P.067) Motor torque display value*
(P.068) Output power factor
(P.069) Encoder counter (x4)*
1 = Speed reference rate limit output
*
2 = Speed reference at the ref/fdbk summing
junction (includes OCL output and current
compounding)
*
3 = Speed loop feedback
*
4 = Speed loop error
*
5 = Speed PI output
*
6 = Outer control loop feedback
*
7 = Outer control loop error
*
8 = Outer control loop output
*
9 = Terminal strip analog input normalized to speed
(see Appendix F)
10 = Terminal strip analog input scaled (see
Appendix F)
11 = Torque reference
*
12 = Torque feedback
*
Default Setting: 0
Parameter Type: Tunable
Refer also to parameters: N/A
* These signals are valid only in vector control (P.048 = UEC).