Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 59)

Starting Up the Drive for Vector Regulation 2-25
6.33 Press the ENTER key to display the default setting of U.022.
This displays the default setting for Motor
Nameplate Horsepower. The default setting
depends on the Power Module rating and is
factory-set. The display here is only an
example.
6.34 Press the ▲ key or the ▼ key to increase or decrease the value if it is different
from the motor nameplate.
The adjustment range is 0.3 to 600.0 HP.
VALUE ENTERED:
6.35 Press the ENTER key to save the displayed value.
After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.
5.0
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
u.022
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC