Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 45)

Starting Up the Drive for Vector Regulation 2-11
Step 5.11 Press the ▲
key to display P.003, Minimum Speed.
This parameter sets the minimum speed
in RPM.
Step 5.12 Press the ENTER key to display the default setting of P.003.
This displays the default setting for
Minimum Speed, 150 RPM.
Step 5.13 Press the ▲
key to increase minimum speed or ▼ the key to decrease
minimum speed.
The adjustment range is:
0 to the value set for P.004 (Maximum
Speed)
VALUE ENTERED:
!
ATTENTION: The drive can operate at and maintain zero speed. The
user is responsible for ensuring safe conditions for operating personnel
by providing suitable guards, audible or visual alarms, or other devices
to indicate that the drive is operating or may operate at or near zero
speed. Failure to observe this precaution could result in severe bodily
injury or loss of life.
p.003
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
i50
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC