Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 62)

2-28 LiquiFlo AC Drive, Software Reference Version 6.4
What Happens if a Fault Occurs During Self-Tuning?
1. If the drive stops due to a fault, the motor will coast to stop. A self-tuning fault code
(SF) will be displayed and must be cleared. Refer to chapter 5 for more
information.
2. Once the drive is stopped, parameter U.008 will be reset to OFF and the
self-tuning procedure will be completed. The results are stored in U.009, Torque
Self-Tune Result.
Step 8.1 Press the ▼
key to display U.008, Torque Self-Tune Enable.
Parameter U.008 is displayed.
Step 8.2 Press the ENTER key.
The default setting of OFF is displayed.
Step 8.3 Press the ▲ key to enable the self-tuning procedure.
On is displayed.
u.008
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
off
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
O