Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size - Manual (Page 120)

9-6 Frame 12 Installation
Removing the Protective
Covers Moving the Control Frame
To gain access to the power wiring terminals, airflow plate and protective
covers you may need to move the Control Frame out of the way. If you do
not need to move the control frame, continue with
"Removing the Airflow
Plate" on page 9-7 .
Task Description
Loosen the T8 Torx-head screws that secure the Control Frame to the drive enclosure
(Remove screws on early frame 10 drives).
Swing the Control Frame out and away from the power structure.
A
B
A
B
A