Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size - Manual (Page 70)

4-12 Control Wiring for PowerFlex 700S Drives with Phase II Control
Please note there are two separate values for an encoder.
Encoder Supply
Voltage 12V DC S2-4 12V DC 5V DC Change with Power Off
Set all switches the same Encoder Signal A
Voltage 12V DC S2-1 12V DC 5V DC
Encoder Signal B
Voltage 12V DC S2-2 12V DC 5V DC
Encoder Signal Z
Voltage 12V DC S2-3 12V DC 5V DC
Function Down Switch Up Center Notes
DriveLogix
Processor Run S1 Prog Remote Processor Mode
Function Default Switch Open Closed Notes