Rockwell Automation 20D PowerFlex 700H and 700S Frame 9-14 Drives Installation - A4 Size - Manual (Page 162)

11-16 Frame 14 Installation
Power Wiring To access the power terminals, you must first remove the protective screens
(on NEMA/UL Type 1 and Type 12 enclosures), air flow plate and
protective covers from the Inverter units. These steps are detailed below.
Removing the Protective
Covers from the Inverter
Units Removing the Protective Screens
To access the components within the Power Structures, you must first
remove the protective screens from the Inverter units.
Task Description
Remove the screws that secure the protective screens to the inverter units and
remove the screens.
A
A