Rockwell Automation TLAR Electric Cylinders Replacement - Manual (Page 11)

MP-Series and TL-Series Electric Cylinders Replacement Parts 11
Rockwell Automation Publication MPAR-IN002B-EN-P - September 2012
4. Torque the bolts as shown in this table.
5. Align the coupling, the motor, and the actuator cylinder and push them together.
6. Attach the motor to the motor mount flange by using all four bolts.
7. Torque bolts as follows.
Cat. No.
Bolt
Quantity Bolt
Size
Torque
N•m
(lb•in)
Cat. No.
Bolt
Quantity Bolt
Size
Torque
N•m
(lb•in)
MPAR-x1xxxx-xxA
4
M4 x 12
2.9
(25.6)
TLAR-A1xxxB-BxA
4
M3 x 12
1.2
(10.6)
MPAR-x2xxxC-xxA TLAR-A1xxxE-BxA
M4 x 16
2.9
(25.6)
MPAR-x2xxxF-xxA TLAR-A2xxxC-BxA
MPAR-x3xxxE-xxA
M6 x 20 9.9 (87.6)
TLAR-A2xxxF-BxA
MPAR-x3xxxH-xxA 3 TLAR-A3xxxE-BxA
M6 x 16
9.9
(87.6)
TLAR-A3xxxH-BxA
Cat. No.
Bolt
Size Torque
N•m (lb•in)
Cat. No. Bolt Size
Torque
N•m (lb•in)
MPAR-x1xxxx-xxA
M5 x 20 5.9 (52.2)
TLAR-A1xxxB-BxA M4 x 16 2.9 (25.6)
MPAR-x2xxxC-xxA TLAR-A1xxxE-BxA
M5 x 16 5.9 (52.2) MPAR-x2xxxF-xxA TLAR-A2xxxC-BxA
MPAR-x3xxxE-xxA M6 x 25 9.9 (87.6) TLAR-A2xxxF-BxA
MPAR-x3xxxH-xxA M8 x 25 24.0 (212.42) TLAR-A3xxxE-BxA
M6 x 20 9.9 (87.6)
TLAR-A3xxxH-BxA
Align Coupling Hubs