Rockwell Automation TLAR Electric Cylinders Replacement - Manual (Page 13)

MP-Series and TL-Series Electric Cylinders Replacement Parts 13
Rockwell Automation Publication MPAR-IN002B-EN-P - September 2012
5. Loosen, but do not remove the four blots that hold the motor to the belt housing.
This relieves the tension on the belt.
6. Remove the pulleys and the belt.
Use a wrench to hold the pulley in place while turning the collar clockwise with a hex
driver.
The pulley has a left hand thread.
7. If you are changing the motor or actuator cylinder orientation, follow steps 7a through
7e; if not, go to
step 8 .
Motor Mount Bolts (4X)
Spacer Ring
Belt
Pulleys