Rockwell Automation 2500 IntelliCENTER Software - Manual (Page 26)

26 IntelliCENTER Software
Publication MCC-UM001E-EN-P - March 2014
The Monitor View lets you access real-time data about each unit, such as amperes, current, and fault information. The toolbar at
the top of this view lets you access different views and functionality that are available for the device. The tabs at the bottom let
you switch between different ports associated with the device. If multiple network devices are associated with a single MCC unit,
then the Monitor View includes tabs (at the top) to toggle between the different devices.
View Different Parameters in the Monitor View
To view the parameters for the device, click the Parameters icon on the toolbar.
IMPORTANT
IntelliCENTER software version 5.00.01 and later does not communicate with PowerFlex 753/755 drives via the
20-COMM-D option card. The 20-COMM-D option card is not a supported option for the PowerFlex 753/755 drives. Use
the 20-750-DNET option card to communicate with the PowerFlex 753/755 drives over the DeviceNet network.