Rockwell Automation 2500 IntelliCENTER Software - Manual (Page 31)

IntelliCENTER Software 31
Publication MCC-UM001E-EN-P - March 2014
Change Parameter Values
To change the parameter value of those parameters that are editable (for example, changing FLA setting from 1.0…5.0 A), click
the text box associated with the Parameter Value to be changed and change it to the desired value by using the Edit Parameter
dialog box that appears.
IMPORTANT
The new value entered must be within the Min Value and Max Value displayed at the bottom of the Edit Parameter dialog box.
The Min and Max values are specific to the device and the parameter being changed. Click Apply in the Edit Parameter dialog box
to have the new value written to the device.