Rockwell Automation 2500 IntelliCENTER Software - Manual (Page 30)

30 IntelliCENTER Software
Publication MCC-UM001E-EN-P - March 2014
View Different Parameters in the Monitor View
To view different parameters in the Monitor View, right-click the display (analog dials, trending graphs, data, or parameters),
choose Change Parameter Monitored, and then choose the new parameter from the pull-down menu.
IMPORTANT
Changes do not take effect until you click Apply on the Monitor dialog box. Changing parameters to be displayed in the analog
dials or trend graphs affects all other similar devices. That is, if the Monitor view of an E3 overload is changed to display Average
current, Ground Fault current, and Phase imbalance on the analog dials, all other E3 Monitor dialog boxes display the same
information.