Rockwell Automation 2500 IntelliCENTER Software - Manual (Page 28)

28 IntelliCENTER Software
Publication MCC-UM001E-EN-P - March 2014
Change Parameter Values
The Value cell appears white and is enabled for those parameters that are editable. To change a parameter value, scroll down the
Parameter List view and find the parameter you want to change. Then type the new value into the Value field.
IMPORTANT
The new value entered must be within the Min Value and Max Value displayed in the corresponding columns. The Min
and Max values are specific to the device and the parameter being changed. After entering the new value, it is written to
the device.