Controlnet network, Ethernet network, Recommended additional software – Rockwell Automation 2500 IntelliCENTER Software User Manual
Page 7: Online help
IntelliCENTER Software 7
Publication MCC-UM001E-EN-P - March 2014
ControlNet Network
For a ControlNet network, you need the following equipment:
• Laptop computer: 1784-PCC ControlNet personal computer interface card and 1784-C1 cable
• Desktop computer: 1784-PCIC ControlNet personal computer interface card and 1784-TPR ControlNet tap
Ethernet Network
For an Ethernet network, you need a laptop or desktop computer. Consult your local computer-support personnel for Ethernet
interface requirements.
Recommended Additional Software
Use RSNetWorx™ for DeviceNet software to configure DeviceNet nodes, save parameters, and communicate to all types of
DeviceNet components (sensors, non-Allen-Bradley products, and other products not found in MCCs).
Online Help
The online help included in the IntelliCENTER software complements and adds to the information in this document. To access
the online help, choose Start > Programs > IntelliCENTER > IntelliCENTER Help.
TIP
Consult the ControlNet Coax Media Planning and Installation Guide, publicat
, for configuration and installation of
the ControlNet cable.