Rockwell Automation FactoryTalk Metrics Line Edition Administrators Guide - Manual (Page 31)

4 • C ONFIGURING F ACTORY T ALK M ETRICS LE
27
•
•
•
• •
Configuring the FactoryTalk Directory
In order to configure FactoryTalk Directory for FactoryTalk Metrics LE, you must
perform the following:
„
Add users. Create user accounts in order for users to be able to use FactoryTalk
Metrics. See “Adding FactoryTalk users” on page 28.
„
Configure the OPC Server. Configure RSLinx Enterprise as the OPC server for
FactoryTalk Metrics LE. See “Configuring RSLinx Enterprise as the OPC Server” on
page 28.
Configure FactoryTalk
Transaction Manager
using the FactoryTalk
Metrics LE
Configuration Tool See “Configuring
FactoryTalk Transaction
Manager” on page 38. 9 * *
Register the
FactoryTalk
Transaction Manager
configuration through
the RSBizWare Service
Console See “Registering the
FactoryTalk Transaction
Manager configuration
for data collection” on
page 43. 9
Configure FactoryTalk
Metrics using the
FactoryTalk Metrics
LE Configuration Tool See “Configuring
FactoryTalk Metrics” on
page 44. 9 * *
Modify performance
parameters through the
RSBizWare
Configuration Console See “Modifying
performance parameters”
on page 45. 9 * *
Configure reports (as
needed) See “Configuring
Reports” on page 47. 9 9 9
* This step is required if you plan to use the FactoryTalk Metrics LE Configuration Tool to add more
workcells to an existing application.
Configuration Step Document Reference New
Install
Update
FTMLE
8.0
Update
FT Metrics
9.0
FTMLE Admin Guide.book Page 27 Friday, August 8, 2008 8:28 AM