Rockwell Automation 2098-DSD-xxx Ultra3000 Drive Systems Design Guide - Manual (Page 37)

Rockwell Automation Publication GMC-RM008A-EN-P - September 2011 37
Ultra3000 Drive Systems
Ultra3000 (400V class) Drives with MP-Series Food Grade Motors
This section provides system combination information for the Ultra3000 (400V class) drives when matched with
MP-Series food-grade motors. Included are motor power/brake and feedback cable catalog numbers, system performance
specifications, and the optimum torque/speed curves.
Bulletin MPF Motor Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 7 .
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 6 .
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004 , for standard cable lengths.
Bulletin MPF Motor Performance Specifications with Ultra3000 (400V class) Drives
Performance specification data and curves reflect nominal system performance of a typical system with motor at 40 °C (104 °F) and drive at 50 °C (122 °F) ambient and rated line voltage. For additional
information on ambient and line conditions, refer to Motion Analyzer software, version 4.7 or later.
Motor Cat. No. (400V class) Motor Power Cable Motor Feedback Cable
(1)
(1) Use drive-mounted breakout board (catalog number 2090-UXBB-DM15) with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 4 .
MPF-B310P, MPF-B320P, MPF-B330P
2090-CPxM7DF-16AAxx (standard, non-flex)
2090-CPxM7DF-16AFxx (continuous-flex) 2090-CFBM7DF-CEAAxx or
2090-CFBM7DD-CEAAxx (standard, non-flex)
2090-CFBM7DF-CEAFxx or
2090-CFBM7DD-CEAFxx (continuous-flex)
Absolute High-resolution Feedback
MPF-B430P
MPF-B4530K, MPF-B4540F
MPF-B540K
2090-CPxM7DF-10AAxx (standard, non-flex)
2090-CPxM7DF-10AFxx (continuous-flex)
Rotary Motor
Speed, max
rpm
System Continuous
Stall Current
A (0-pk) System Continuous
Stall Torque
N•m (lb•in) System Peak
Stall Current
A (0-pk) System Peak
Stall Torque
N•m (lb•in) Motor Rated
Output
kW
Ultra3000
400V-class Drives
MPF-B310P 5000 2.30 1.58 (14) 7.1 3.61 (32) 0.77 2098-DSD-HV030
MPF-B320P 5000 4.24 3.05 (27) 14.0 7.34 (65) 1.5 2098-DSD-HV030
MPF-B330P 5000 5.70 4.18 (37)
14.0 8.59 (76)
1.6
2098-DSD-HV030
19.0 11.1 (98) 2098-DSD-HV050
MPF-B430P 5000 9.20 6.55 (58)
22.0 12.9 (114)
2.0
2098-DSD-HV050
32.0 19.8 (175) 2098-DSD-HV100
MPF-B4530K 4000 9.90 8.25 (73)
22.0 14.5 (128)
2.4
2098-DSD-HV050
31.0 20.3 (180) 2098-DSD-HV100
MPF-B4540F 3000 9.10 10.2 (90)
22.0 22.0 (195)
2.5
2098-DSD-HV050
29.0 27.1 (240) 2098-DSD-HV100
MPF-B540K 4000 20.5 19.4 (172)
46.0 33.9 (300)
4.1
2098-DSD-HV100
60.0 45.2 (400) 2098-DSD-HV150