Rockwell Automation 2098-DSD-xxx Ultra3000 Drive Systems Design Guide - Manual (Page 40)

40 Rockwell Automation Publication GMC-RM008A-EN-P - September 2011
Ultra3000 Drive Systems
Ultra3000 (200V class) Drives/MP-Series Stainless Steel Motor Curves
Ultra3000 (400V class) Drives with MP-Series Stainless Steel Motors
This section provides system combination information for the Ultra3000 (400V class) drives when matched with
MP-Series stainless-steel motors. Included are motor power/brake and feedback cable catalog numbers, system
performance specifications, and the optimum torque/speed curves.
Bulletin MPS Motor Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 7 .
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 6 .
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004 , for standard cable lengths.
Motor Cat. No. (400V class) Motor Power Cable Motor Feedback Cable
(1)
(1) Use drive-mounted breakout board (catalog number 2090-UXBB-DM15) on the drive end. Refer to Required Drive Accessories on page 4 .
MPS-B330P
2090-XXNPMF-16Sxx (standard, non-flex)
2090-CPxM4DF-16AFxx (continuous-flex)
2090-XXNFMF-Sxx (standard, non-flex)
2090-CFBM4DF-CDAFxx (continuous-flex)
Absolute High-resolution Feedback
MPS-B4540F
MPS-B560F
2090-XXNPMF-14Sxx (standard, non-flex)
2090-CPxM4DF-14AFxx (continuous-flex)
Torque
(N•m)
Torque
(lb•in)
2098-DSD-020 and MPS-A330P
Speed (rpm)
0 2000 4000 3000 1000 5000
12.0
10.0
8.0
6.0
4.0
2.0
0
106
88.4
70.8
53.1
35.4
17.6
0
= Intermittent operating region
= Continuous operating region
Torque
(N•m)
Torque
(lb•in)
2098-DSD-075 and MPS-A4540F
30
25
20
15
10
5
0
265
221
177
133
88
44
0
Speed (rpm)
0 3000 2000 1000