Rockwell Automation FD86N Drive Systems Enclosure Hardware - Manual (Page 34)

3-8 Joining Bus Bar Assemblies
Publication S-3062 – November 1997
Installing DC Bus Bar
Connections to a
Bulletin 2100 MCC To join DC bus bars to an MCC:
1. Remove the supplied hardware from the bus tab.
2. Make the bus connection between the FD86N enclosure and MCC.
3. Reinstall the hardware, oriented as shown in Figure 3.10.
Figure 3.10
Installing DC Bus Bar Connections from the FD86N Enclosure to an MCC
Bolt and Flat Washer
Flat Washer, Conical
Washer, and Nut
Bus Bar
Top Down View
Bus Tab
MCC FD86N Enclosure
Front of Enclosures
Note: Bus depth in the MCC must be 16.94
″
from the front of the cabinet.