Rockwell Automation FD86N Drive Systems Enclosure Hardware - Manual (Page 36)

3-10 Joining Bus Bar Assemblies
Publication S-3062 – November 1997
Installing the Ground Cables
between FD86N Enclosures To install the ground cables between FD86N enclosures, see Figure 3.12
for ground cable location and hardware orientation. The control enclosure
ground bus can be mounted at the top or the bottom of the control panel.
Figure 3.12
FD86N Enclosure to FD86N Enclosure Ground Cable Location and
Hardware Orientation
Bolt and Flat Washer
Flat Washer, Conical
Washer, and Nut
Ground Cables