Connecting the incoming ground bus – Rockwell Automation FD86N Drive Systems Enclosure Hardware User Manual
Page 37
Advertising
Joining Bus Bar Assemblies
3-11
Publication S-3062 – November 1997
Connecting the Incoming
Ground Bus
To connect the incoming ground bus, see figures 3.13 and 3.14.
Note: Use the jumper and hardware furnished with the bus bar assembly.
Figure 3.13
Connecting Incoming Ground Bus Bar Assembly Cables to the FD86N Enclosure
Ground Cables
Pull Box
Control Mounting Panel
(Front of Cabinet)
Ground Bus
Advertising