Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 96)

96 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 7 Send Email
Enter Email Text Use the string browser to type the text of the email. To include To:, From:, and
Subject: fields in the email, use <CR><LF> symbols to separate each of these
fields. The To: and From fields are required; the Subject: field is optional. For
example:
To: email address of recipient <CR><LF>
From: email address of sender <CR><LF>
Subject: subject of message <CR><LF>
body of email message
An email message must not exceed 474 characters in length. An additional 4-byte
string-length value is added to the tag. As a result, the maximum source length is
478 characters.
Possible Email Status Codes Examine the destination element of the email MSG to see whether the email was
successfully delivered to the mail relay server. A successful delivery indicates that
the mail relay server placed the email message in a queue for delivery, but it does
not mean the intended recipient received the email message. These are the
possible codes that a destination element could contain.
Table 20 - Email Status Code Descriptions
Error
Code
(Hex) Extended-
error Code
(Hex) Description
0x00 None Delivery successful to the mail relay server.
0x02 None Resource unavailable. The email object was unable to obtain memory resources to
initiate the SMTP session.
0x08 None Unsupported Service Request. Make sure the service code is 0x4B and the Class is
0x32F.
0x11 None Reply data too large. The Destination string must reserve space for the SMTP
server reply message. The maximum reply can be 470 bytes.
0x13 None Configuration data size too short. The Source Length is less than the Source
Element string size plus the 4-byte length. The Source Length must equal the
Source Element string size + 4.
0x15 None Configuration data size too large. The Source Length is greater than the Source
Element string size plus the 4-byte length. The Source Length must equal the
Source Element string size + 4.
0x19 None Data write failure. An error occurred when attempting to write the SMTP server
address (attribute 4) to nonvolatile memory.
0xFF 0x0100 Error returned by email server; check the Destination string for reason. The email
message was not queued for delivery.
0x0101 SMTP mail server not configured. Attribute 5 was not set with a SMTP server
address.
0x0102 ‘To:’ address not specified. Attribute 1 was not set with a ‘To:’ address AND there is
not a
‘To:’ field header in the email body.
0x0103 ‘From:’ address not specified. Attribute 2 was not set with a ‘From:’ address AND
there is not a
‘From:’ field header in the email body.