Rockwell Automation HPK-Series Asynchronous Servo Motor - Manual (Page 2)

2 HPK-Series Asynchronous Servo Motors
Publication HPK-IN001C-EN-P - June 2010
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls, publication
SGI-1.1, is available from your local Rockwell Automation sales office or online at
http://www.rockwellautomation.com/literature. It describes some important differences between solid state
equipment and hard-wired electromechanical devices. Because of this difference, and also because of the
wide variety of uses for solid state equipment, all persons responsible for applying this equipment must
satisfy themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot
assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell
Automation, Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
WARNING: Identifies information about practices or circumstances that
can cause an explosion in a hazardous environment, which may lead to
personal injury or death, property damage, or economic loss.
ATTENTION: Identifies information about practices or circumstances
that can lead to personal injury or death, property damage, or economic
loss. Attentions help you to identify a hazard, avoid a hazard, and
recognize the consequences.
SHOCK HAZARD: Labels may be located on or inside the equipment, for
example, a drive or motor, to alert people that dangerous voltage may be
present.
BURN HAZARD: Labels may be located on or inside the equipment, for
example, a drive or motor, to alert people that surfaces may be dangerous
temperatures.
IMPORTANT Identifies information that is critical for successful application and
understanding of the product.