Rockwell Automation HPK-Series Asynchronous Servo Motor - Manual (Page 27)

HPK-Series Asynchronous Servo Motors 27
Publication HPK-IN001C-EN-P - June 2010
Load Force Capacities
This section contains the radial and axial motor load-force ratings for HPK-Series motors. These
motors are capable of operating with the maximum radial or maximum axial shaft loads listed in
the following tables. Radial loads listed are applied in the middle of the shaft extension.
Shaft Loading HPK-Series Motor Load Forces
The tables below represent an L
10
bearing fatigue life of 10,000 hours. This 10,000-hour life
does not account for possible application-specific life reduction that may occur due to bearing
grease contamination from external sources. Maximum operating speed is limited by motor
winding.
Radial Load-force Ratings (Zero Axial Load)
Motor Series
HPK-
850 rpm
kg (lb)
1150 rpm
kg (lb)
1750 rpm
kg (lb)
2500 rpm
kg (lb)
B/E1307 320 (704) 290 (638) 250 (550) 220 (485)
B/E1308 320 (704) 290 (638) 250 (550) 220 (485)
B/E1310 320 (704) 290 (638) 250 (550) 220 (485)
B/E1609 500 (1100) 450 (990) 390 (858) 350 (770)
B/E1611 500 (1100) 450 (990) 390 (858) 350 (770)
B/E1613 500 (1100) 450 (990) 390 (858) 350 (770)
B/E1815 530 (1166) 530 (1166) 530 (1166) 450 (990)
B/E2010 660 (1452) 660 (1452) 660 (1452) 580 (1276)
B2212 730 (1609) 690 (1521) 600 (1323) 530 (1169)
B2510 670 (1503) 610 (1369) 550 (1234) 480 (1077)
Radial load force applied
at center of shaft extension
Axial load force