Keying – Rockwell Automation T7480 ICS Regent+Plus Guarded Analog Output Modules User Manual
Page 10
Advertising
Guarded Analog Output Modules (T7480)
1 0
Industrial Control Services
Keying
The I/O chassis can be physically keyed to prevent accidental
damage caused by inserting a module into a slot wired for a
different module type. Figure 5 illustrates how the slot keys
are installed on the I/O chassis slot field wiring connectors.
The slot key positions for the Guarded analog output module
are listed in Table 1.
Table 1. Slot Key Positions.
Module
Upper
Connector
Lower
Connector
T7480
9
10
Advertising