Rockwell Automation FactoryTalk Transaction Manager User Guide - Manual (Page 101)

7
●
Creating Transactions
●
●
●
●
●
101
 Bit 1- The Error Bit. A 1 indicates there was an error, a 0 indicates no
error.
 Bits 2 through 15- The Error Code. If Bit 1 contains a 1, these bits
contain the error code. Otherwise, these bits are zeros. If you chose to
use the Transaction Result code, you can run the FactoryTalk
Transaction Manager error utility from the Startup menu. This
eliminates the need to decode the integer to determine the FactoryTalk
Transaction Manager error code.
To convert the error code to a proper error number:
1. Select Start > Programs > Rockwell Software > FactoryTalk
Transaction Manager > Error Messages. The FactoryTalk
Transaction Manager Error Messages dialog box appears.
2. Enter the Transaction Result code number (binary or decimal).
3. Click the Bind Transaction Result Error radio button.
4. Click Apply.
For example, a transaction result code of 0000000000000001 (binary) or 1
(decimal) indicates that the transaction has completed without errors.
If the Transaction Result code is: 0000010111101111 (1519 decimal) then
the FactoryTalk Transaction Manager error code is: 33147.
Transaction Timeout
The transaction timeout parameter specifies how long the Transaction
Control Manager service or FactoryTalk Transaction Manager service
should wait for a transaction to complete. The transaction timeout for an
unscheduled transaction does not affect other copies of the same
unscheduled transactions as multiple copies of the unscheduled transaction
can execute at the same time.