Rockwell Automation FactoryTalk Transaction Manager User Guide - Manual (Page 58)

●
●
●
●
●
FactoryTalk Transaction Manager User Guide
58
configuration), and double-click the mouse. The Properties dialog box
appears.
9. In the Start-up field, select Automatic.
10. Click OK.
11. Repeat steps 2 through 4 for each connector service in your
configuration.
The Transaction Control Manager service and the FactoryTalk Transaction Manager
service cannot be set to Auto-start at the same time.
Stopping Configurations
You can stop a configuration by using one of the following methods:
 Select the configuration name in the Configuration tree, right-click and
select Stop Configuration from the menu.
 Select the configuration name in the Configuration tree, then click Stop
on the toolbar.
You cannot stop the configuration by exiting FactoryTalk Transaction
Manager or logging off of the computer. For more information, see Chapter
9, Exploring Advanced Topics (page 131).
Starting and Stopping Connectors
To start an individual connector when a configuration is running, select the
connector in the Configuration tree, right-click and select Start Connector
Service from the menu. To stop an individual connector when a
configuration is running, select the connector in the Configuration tree,
right-click and select Stop Connector Service from the menu.
Monitoring Configurations
You can monitor transactions as they are executed while a configuration
runs. Click Transaction Monitor on the toolbar to view a summary of
cumulative activity organized by transaction.