Rockwell Automation FactoryTalk Transaction Manager User Guide - Manual (Page 168)

●
●
●
●
●
FactoryTalk Transaction Manager User Guide
168
 already logged on to the FactoryTalk Directory via Start > Programs >
Rockwell Software > FactoryTalk Tools > Log on to FactoryTalk or
some other FactoryTalk-enabled product.
Then FactoryTalk Transaction Manager immediately retrieves your SSO
information at startup. That user information represents both the
FactoryTalk Transaction Manager and FactoryTalk logged-in user.
S
CENARIO
3: Y
OU
D
O
N
OT
H
AVE A
W
INDOWS
-
LINKED
U
SER
A CCOUNT
Prior to starting FactoryTalk Transaction Manager, if you:
 are not recognized as the SSO user,
 do not have a Windows-linked user account in the FactoryTalk
Directory.
Then FactoryTalk Transaction Manager recognizes that an SSO is not
present at startup. You are prompted with the Log on to FactoryTalk dialog
box. Either:
 Enter a valid FactoryTalk user name and password - In this case,
you are immediately logged into FactoryTalk Transaction Manager and
your user information represents the computer-wide SSO user.
 Cancel the log on prompt - In this case, FactoryTalk Transaction
Manager starts up with the default system graphic displayed. To use
FactoryTalk Transaction Manager effectively, you must select Security
> Logon; you are immediately logged into FactoryTalk Transaction
Manager and your user information represents the computer-wide SSO
user.
When Using FactoryTalk Transaction Manager
Use the following sections to learn how the SSO information is used when
you are using FactoryTalk Transaction Manager: