Bowers Group Sylvac D100S Readouts - Manual (Page 10)

1.5. EXAMPLES OF OPERATIONS
1/ Simple measurements:
- Choose the required channel: + channel number +
or
- Reverse measuring direction: then
2/ Combined measurements A+/-B (using D102 or D108)
- Choose the measuring direction of channel 1: then
- Choose combination 1+2 or 1-2:
then then then then
3/ Combined measurements A+/-B+/-C
Proceed in the same way as for 2 channels.
Continue with then then
4/ Multiplication factor (also available for A+/-B and A+/-B+/-C combinations)
then then multiplication factor (e.g. 0.33333)
5/ Measurements and checking tolerance limits
- Enter nominal value, the upper and the lower tolerances: then
- activates or deactivates the tolerance indicators.
9
if this channel was combi-
ned (A+/-B or A+/-B+/-C)
once = +
twice = -