Bowers Group Sylvac D100S Readouts User Manual
Page 7
6
: either proceed to preceding channel, adjust contrast or pneumatic descent
When entering parameters: confirm numerical entry or proceed to following menu.
then
: choice of Enter/Clear function: change channel, contrast adjustment
or pneumatic descent
and
: unlock the keyboard if inhibited
: either proceed to following channel, adjust contrast or pneumatic raise. Leave a menu without
modification
then
: choice of Enter/Clear function: change channel, contrast adjustment
or pneumatic descent
and
: main reset of the unit (complete reinitialization of parameters)
: switch unit ON/OFF. All parameters will be stored after unit has been switched off.
: can be programmed for: - data transmission to Centronics/RS232 outputs
- hold/store
- new min/max
- preset
- change channels
- pneumatic lifting
- scanning
different combination of the above functions are also possible (up to 2x30 possible combina-
tions).