Bowers Group Sylvac D100S Readouts - Manual (Page 49)

48
The following will appear if the 1st choice is selected.
Pressing the key erases the last stored value.
The key will recover erased value(s). When the last stored value is
displayed, this key will quit the stored values display.
The key saves correction(s) and quits the table.
The key outputs stored values to the RS232/Centroics ports, from first to last, according to the selected Print
format (refer to Section 1.6.14: Print key).
Once all data have been transmitted, the unit asks if you wish to:
- keep stored values —> press Enter
- erase stored values for current channel —> press Clear
Printing of stored values may also be requested from the computer (refer to remote command). The Xon/Xoff protocol
can be used by the computer for transmission control.
In Scanning mode, Setup + Store asks you which channel you wish to work on. If you reply with 0, the stored values of
all channels are printed.
11 10.002
12 10.001
13 10.003
14 10.000 • Print
15 9.999
16 10.000 erase
17 9.998 recall
18 10.001 0 end